| Author | Topic |
|---|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: Machining wheel hubs
|
Wed, 11 February 2004 01:43
 
|
 |
The 297mm rotor and Nissan caliper fit nicely onto the RA60 hub/strut, and the bonus is the caliper bolt holes line up, you just need a spacer plate between the caliper and strut. All the stuff I did myself, and I've got a couple of RA60 hubs I chewed the outside off of in the name of experimentation. I did the centres myself too, the many benefits of having a lathe  I'm not quite sure how well the MS65 hub lines up, it might be even better, I'd have to get one and see
|
|
|
| | Subject | Poster | Date |
|---|
 |
Machining wheel hubs
|
justcallmefrank | Tue, 10 February 2004 09:06 |
|
Re: Machining wheel hubs
|
bbaacchhyy | Tue, 10 February 2004 09:39 |
|
Re: Machining wheel hubs
|
mrshin | Tue, 10 February 2004 12:09 |
|
Re: Machining wheel hubs
|
justcallmefrank | Tue, 10 February 2004 14:00 |
|
Re: Machining wheel hubs
|
mrshin | Wed, 11 February 2004 01:22 |
|
Re: Machining wheel hubs
|
justcallmefrank | Wed, 11 February 2004 01:27 |
|
Re: Machining wheel hubs
|
bbaacchhyy | Wed, 11 February 2004 01:45 |
|
Re: Machining wheel hubs
|
mrshin | Wed, 11 February 2004 01:43 |
|
Re: Machining wheel hubs
|
justcallmefrank | Wed, 11 February 2004 01:48 |
|
Re: Machining wheel hubs
|
justcallmefrank | Wed, 11 February 2004 01:50 |
|
Re: Machining wheel hubs
|
mrshin | Wed, 11 February 2004 12:08 |
|
Re: Machining wheel hubs
|
gianttomato | Wed, 11 February 2004 22:27 |
|
Re: Machining wheel hubs
|
mrshin | Wed, 11 February 2004 22:45 |
|
Re: Machining wheel hubs
|
justcallmefrank | Wed, 11 February 2004 23:11 |
|
Re: Machining wheel hubs
|
justcallmefrank | Wed, 11 February 2004 23:12 |
|
Re: Machining wheel hubs
|
justcallmefrank | Wed, 11 February 2004 23:15 |
