| Author | Topic |
|---|
Location:
Tasmania
Registered:
May 2002
|
|
Re: 2TG/3T hybred what pistons
|
Fri, 13 February 2004 12:16
 
|
 |
Search this forum a bit more, it has been covered many times.
3T pistons must be used together with a 3T crank.
2T and 2T-G pistons must be used with a 2T crank.
Generaly, when going from standard 2TG pistons to generic 3T pistons and crank, the compression will be increased a bit, from about 8.8:1 standard, to about 10 or 10.5:1.
Using the 3T setup, the cheapest is to use regular 3T-C pistons with the exhuast releif cut a bit deeper. You can get these in 86mm new.
2T-G pistons had different compression depending on the year and other things. Older ones were about 9.8:1, latter ones where 8.8:1, some where 8.4:1, some 8.3:1 I think. A standard 3T will have a compression of about 9 to one. Using this bottom end with a 2T-G head increases the compression because the 2TG head chamber is slightly smaller, 62 vs 68cc I think.
|
|
|
