F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » HELP: KE30 Conversion Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Rob20v Occasional Poster Location: Geelong Registered: August 2002	Re: HELP: KE30 Conversion Fri, 16 August 2002 13:30 I put a 2tg in a ke30 I raced, the only drama was I had to alter the engine mountings on the cross member to make the engine fit nicely. Got all my donor parts from a ta22 celica, including the engine mounting plates from the celica. The clutch hydraulics from the celica just fit on the firewall where you see the impressions (not drilled on Aussie ke30). I used the ta22 clutch pedal just re bent it to fit and made a pin come out from the side of the clutch pedal to line up with the clutch master cylinder rod. The rear mount just uses the other set of bolt holes already there. The only thing I recomend you use is the rear axle out of the ta22 as I broke a few axles on the dirt and found i needed to do this. I am currently doing a 2tg fit into a ke25 (Levin copy)as I don't have to engineer it in Victoria but are having to do some mods to the pedal assy which is a headache. [Report message to a moderator]

	Subject	Poster	Date
	HELP: KE30 Conversion	Barney	Wed, 14 August 2002 01:50
	Re: HELP: KE30 Conversion	EMP-2TG	Wed, 14 August 2002 06:36
	Re: HELP: KE30 Conversion	Hunty	Wed, 14 August 2002 09:13
	Re: HELP: KE30 Conversion	EMP-2TG	Wed, 14 August 2002 11:13
	Re: HELP: KE30 Conversion	Hunty	Wed, 14 August 2002 11:56
	Re: HELP: KE30 Conversion	EMP-2TG	Wed, 14 August 2002 13:53
	Re: HELP: KE30 Conversion	Jonny2TG	Wed, 14 August 2002 14:15
	Re: HELP: KE30 Conversion	EMP-2TG	Thu, 15 August 2002 02:47
	Re: HELP: KE30 Conversion	Barney	Thu, 15 August 2002 03:31
	Re: HELP: KE30 Conversion	EMP-2TG	Thu, 15 August 2002 06:57
	Re: HELP: KE30 Conversion	Grega	Thu, 15 August 2002 08:36
	Re: HELP: KE30 Conversion	Rob20v	Fri, 16 August 2002 13:30
	Re: HELP: KE30 Conversion	bloody_huge23	Sun, 18 August 2002 02:47
	Re: HELP: KE30 Conversion	EMP-2TG	Mon, 19 August 2002 07:33
	Re: HELP: KE30 Conversion	Karl_skewes	Wed, 21 August 2002 03:36
	Re: HELP: KE30 Conversion	faulksy	Wed, 21 August 2002 05:15
	Re: HELP: KE30 Conversion	Karl_skewes	Wed, 21 August 2002 05:35
	Re: HELP: KE30 Conversion	faulksy	Wed, 21 August 2002 06:14
	Re: HELP: KE30 Conversion	Karl_skewes	Wed, 21 August 2002 06:17

Previous Topic:	Clutch Screeching
Next Topic:	Alternator location on a K series engine

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.