Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » cooling/overheating query

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
thechuckster
Forums Junkie


Location:
Brisbane
Registered:
February 2003
 
Re: cooling/overheating query Sat, 14 February 2004 13:50 Go to previous messageGo to previous message
OK ... compression test is OK:
dry: 150/140/150/150
wet: 150/140/150/155 (probably not enuf oil for all of them?)
all readings are psi and were after 4 compression strokes of target cylinder

the plugs were a burning OK but running rich (insulators were light brown to white, with black shadows, but backs of electrode and metal parts down inside plug were black, with no 2 having the most carbon coating. no eveidence of serious detonation and pinging (spots and burnt on crap). No evidence of burning oil and you can still see clean machining marks on the bores when looking thru plug holes.

so the valves/rings likely to fail first will be 2?

but i think i can rule out something happeni=ng in the combustion chamber.

except that running rich will make more heat and will also explain why the exhaust manifold is getting red hot where the ports 2 & 3 join up with 1, just before the turbo (which is between 3 & 4. i think that's the greatest collission point for host gasses and unburnt fuel or carbon-rich gasses.

next stop - flush the cooling system (again) and check the fans.
  Send a private message to this user    

SubjectPosterDate
Read Message   cooling/overheating query thechucksterSat, 14 February 2004 04:19
Read Message   Re: cooling/overheating query V8_MA61Sat, 14 February 2004 04:27
Read Message   Re: cooling/overheating query thechucksterSat, 14 February 2004 07:13
Read Message   Re: cooling/overheating query V8_MA61Sat, 14 February 2004 07:15
Read Message   Re: cooling/overheating query thechucksterSat, 14 February 2004 07:28
Read Message   Re: cooling/overheating query V8_MA61Sat, 14 February 2004 07:44
Read Message   Re: cooling/overheating query thechucksterSat, 14 February 2004 07:47
Read Message   Re: cooling/overheating query V8_MA61Sat, 14 February 2004 08:42
Read Message   Re: cooling/overheating query thechucksterSat, 14 February 2004 09:05
Read Message   Re: cooling/overheating query V8_MA61Sat, 14 February 2004 09:42
Read Message   Re: cooling/overheating query V8_MA61Sat, 14 February 2004 09:40
Read Message   Re: cooling/overheating query thechucksterSat, 14 February 2004 09:49
Read Message   Re: cooling/overheating query V8_MA61Sat, 14 February 2004 09:52
Read Message   Re: cooling/overheating query thechucksterSat, 14 February 2004 10:05
Read Message   Re: cooling/overheating query  thechucksterSat, 14 February 2004 13:50
Read Message   Re: cooling/overheating query V8_MA61Sun, 15 February 2004 05:57
Read Message   Re: cooling/overheating query thechucksterSun, 15 February 2004 08:09
Read Message   Re: cooling/overheating query V8_MA61Sun, 15 February 2004 10:57
Read Message   Re: cooling/overheating query thechucksterSun, 15 February 2004 11:06
Read Message   Re: cooling/overheating query V8_MA61Sun, 15 February 2004 11:07
Previous Topic:timing on a 2tg
Next Topic:bare matel resprays and panel work.

Goto Forum:
-=] Back to Top [=-

Current Time: Mon Jul 28 08:40:53 UTC 2025

Total time taken to generate the page: 0.0043418407440186 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.