| Author | Topic |
|---|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
 Re: Base ignition timing for 4AGZE
|
Sat, 17 August 2002 11:40
 
|
 |
 the second mark is 10 degrees, when the motor is warmed up, the wire jumper between T and E1 on the diagnostic box, the second marker (10 degrees) is where the pionter should be for base timing. when you pull the jumper out the pointer should be on or around the third mark (this is supposed to be 16 degrees). i always have my base timing set in between the two marks,([__[*[) (about 13 degrees), i have not had any trouble with detonation, having it advanced a bit.
|
|
|
