| Author | Topic |
|---|
Location:
Melbourne
Registered:
April 2003
|
|
Re: Steaming Exhaust Manifold
|
Fri, 20 February 2004 05:19
 
|
 |
OK its got something to do with my TPS...
as on my engine loom, there is a connector to the IDL in the ecu, which goes to the TPS, this has a plug on it to disconnect and to connect, when i disconnect it the engine runs smoother than anything, but idles at 1500rpm, when i had this IDL connected it was dieing at 3000rpm etc etc...
i need to find out what this IDL does,
i don't know why my loom has a connector on it, i bought the engine from a guy who was changing to a 20v motor... as it was in a Clubmen.... and so it does rev perfectly but it idles to high, but that could be also possibly cause i don't have my oxygen sensor hooked up, I'm not sure...
any help
|
|
|
| | Subject | Poster | Date |
|---|
 |
Steaming Exhaust Manifold
|
natez | Fri, 20 February 2004 02:18 |
|
Re: Steaming Exhaust Manifold
|
Grega | Fri, 20 February 2004 02:32 |
|
Re: Steaming Exhaust Manifold
|
natez | Fri, 20 February 2004 02:39 |
|
Re: Steaming Exhaust Manifold
|
TurboRA28 | Fri, 20 February 2004 03:12 |
|
Re: Steaming Exhaust Manifold
|
natez | Fri, 20 February 2004 03:17 |
|
Re: Steaming Exhaust Manifold
|
TurboRA28 | Fri, 20 February 2004 03:29 |
|
Re: Steaming Exhaust Manifold
|
natez | Fri, 20 February 2004 03:59 |
|
Re: Steaming Exhaust Manifold
|
TurboRA28 | Fri, 20 February 2004 04:24 |
|
Re: Steaming Exhaust Manifold
|
TurboRA28 | Fri, 20 February 2004 04:34 |
|
Re: Steaming Exhaust Manifold
|
natez | Fri, 20 February 2004 04:42 |
|
Re: Steaming Exhaust Manifold
|
natez | Fri, 20 February 2004 05:19 |
|
Re: Steaming Exhaust Manifold
|
TurboRA28 | Fri, 20 February 2004 05:31 |
|
Re: Steaming Exhaust Manifold
|
TurboRA28 | Fri, 20 February 2004 05:35 |
|
Re: Steaming Exhaust Manifold
|
natez | Fri, 20 February 2004 05:45 |
