F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Changing Auto Kickdown position - Now Changed! *EDIT* - Pdf file on it Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
HighRolla Forums Junkie Location: Sydney Registered: January 2004	Re: Changing Auto Kickdown position Sat, 21 February 2004 11:50 I was able to change the kickdown point by undoing the locknuts on the auto throttle cable (right most) and reducing the number of threads on the left side of the mounting bracket (hence convincing tranny it had more throttle). The car is now a heap more responsive. Only about 3 - 4 threads (approx 5mm) made the difference. The car kicks down much more readily and is a heap easier to drive. The auto turned out to be a A240L (Hydraulicaly controlled signified by L which allowed this method to make a difference - If it was a 240E (Electronically controlled) this would not have helped as apparently it only affects the quality of the shifts in this case. EDIT - YES IT WOULD...see pdf file in later posts Much less throttle opening is needed now - if anyone else has similar problems I'd recommend checking it out. This shouldn't be harmful to anything should it?? I reckon it may have been out of adjustment before? Any thoughts? Thanks for the help cruz ] [Updated on: Sun, 30 May 2004 01:31] [Report message to a moderator]

	Subject	Poster	Date
	Changing Auto Kickdown position - Now Changed! *EDIT* - Pdf file on it	HighRolla	Thu, 19 February 2004 13:25
	Re: Changing Auto Kickdown position	HighRolla	Thu, 19 February 2004 21:59
	Re: Changing Auto Kickdown position	HighRolla	Fri, 20 February 2004 02:09
	Re: Changing Auto Kickdown position	CrUZsida	Fri, 20 February 2004 02:15
	Re: Changing Auto Kickdown position	HighRolla	Fri, 20 February 2004 02:19
	Re: Changing Auto Kickdown position	CrUZsida	Fri, 20 February 2004 02:24
	Re: Changing Auto Kickdown position	HighRolla	Fri, 20 February 2004 06:53
	Re: Changing Auto Kickdown position	HighRolla	Fri, 20 February 2004 10:21
	Re: Changing Auto Kickdown position	CrUZsida	Fri, 20 February 2004 15:41
	Re: Changing Auto Kickdown position	HighRolla	Fri, 20 February 2004 19:54
	Re: Changing Auto Kickdown position	HighRolla	Sat, 21 February 2004 11:50
	Re: Changing Auto Kickdown position - Now Changed!	Danners	Sat, 21 February 2004 22:30
	Re: Changing Auto Kickdown position - Now Changed!	HighRolla	Sun, 30 May 2004 00:39
	Re: Changing Auto Kickdown position - Now Changed!	HighRolla	Sun, 30 May 2004 01:27

Previous Topic:	ST162 & ST184 Calipers
Next Topic:	replacing sump gasket on 3sfe

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.