| Author | Topic |
|---|
Location:
Sydney, OZ
Registered:
May 2002
|
|
Re: Flywheel to suit 4A
|
Mon, 23 February 2004 23:06
 
|
 |
| Quote: |
Well from what I understood is that the 212mm clutch plate is the biggest that will fit inside the T50 bellhousing. Apparently these came from either the 7A or 4A 20V engines.
Im sure the GZE flywheel is too big to use so I need a smaller one.
Someone correct me if im wrong.
|
No, the only difference is that the input shafts are a different size, not the clutch plate/flywheel, they all use the same diameter flywheel. As a racer, I'm always looking for the cheap bang for bucks and have tried every known rolla gearbox, now happy with the 6-spd. The only thing I've ever changed was the plate/thrust bearing due to the input shaft.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Flywheel to suit 4A
|
Bazooka | Wed, 18 February 2004 07:06 |
|
Re: Flywheel to suit 4A
|
Bazooka | Fri, 20 February 2004 07:07 |
|
Re: Flywheel to suit 4A
|
Steve-AE86 | Fri, 20 February 2004 15:21 |
|
Re: Flywheel to suit 4A
|
Bazooka | Sun, 22 February 2004 01:34 |
|
Re: Flywheel to suit 4A
|
Steve-AE86 | Sun, 22 February 2004 13:51 |
|
Re: Flywheel to suit 4A
|
Bazooka | Sun, 22 February 2004 23:34 |
|
Re: Flywheel to suit 4A
|
Johnny | Mon, 23 February 2004 06:01 |
|
Re: Flywheel to suit 4A
|
Bazooka | Mon, 23 February 2004 07:00 |
|
Re: Flywheel to suit 4A
|
Johnny | Mon, 23 February 2004 23:06 |
|
Re: Flywheel to suit 4A
|
Bazooka | Tue, 24 February 2004 06:49 |
|
Re: Flywheel to suit 4A
|
Johnny | Tue, 24 February 2004 07:59 |
