| Author | Topic |
|---|
Location:
Perth
Registered:
October 2003
|
|
Re: 1JZ TRD Thermostat again!!!
|
Tue, 24 February 2004 13:21
 
|
 |
My radiator is a 420x450x60mm dual row, crossflow ali unit. I thought this would have killed it, but obviously not. Unfortunately I cant really fit anything with more area in, only width, perhaps one of the problems is that ive lost water volume compared to that of a normal 1J radiator due to the smaller size. Ive set my thermo to come on 95 and turn off at 90, im not sure that turning it on any quicker would help. I dont think an undertray would help, but perhaps it's worth a try, might try to duct the air into the radiator a little more effectively. There is no shroud for the fan, as it's just a 16" thermo. The 16" thermo shorud practically takes up the whole face anyway, it touches the end tanks and is only about an 1" off the top and bottom. My intercooler is 400x500x57, so i cant get any bigger, but as Stenno says a bigger intercooler would only hinder the radiator.
Ill be spwein if i have to get another radiator, cost me an arm and a leg to begin with 
|
|
|
| | Subject | Poster | Date |
|---|
 |
1JZ TRD Thermostat again!!!
|
Skip | Tue, 24 February 2004 11:32 |
|
Re: 1JZ TRD Thermostat again!!!
|
Cyber-punk | Tue, 24 February 2004 11:37 |
|
Re: 1JZ TRD Thermostat again!!!
|
Stenno | Tue, 24 February 2004 11:50 |
|
Re: 1JZ TRD Thermostat again!!!
|
Danish | Tue, 24 February 2004 11:58 |
|
Re: 1JZ TRD Thermostat again!!!
|
Stenno | Tue, 24 February 2004 12:02 |
|
Re: 1JZ TRD Thermostat again!!!
|
Skip | Tue, 24 February 2004 13:21 |
|
Re: 1JZ TRD Thermostat again!!!
|
Danish | Tue, 24 February 2004 13:37 |
|
Re: 1JZ TRD Thermostat again!!!
|
Jonny2TG | Tue, 24 February 2004 15:17 |
|
Re: 1JZ TRD Thermostat again!!!
|
lumpy | Tue, 24 February 2004 21:49 |
|
Re: 1JZ TRD Thermostat again!!!
|
Skip | Tue, 24 February 2004 23:34 |
