Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » g series into ma61 swap...what do i neeed to do?

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
Norbie
Forums Junkie


Location:
Brisbane
Registered:
May 2002
Re: g series into ma61 swap...what do i neeed to do? Wed, 25 February 2004 05:42 Go to previous messageGo to previous message
If you compare the MA61 rear end to the MA70 rear end, you'll note they're completely different in every way. Transplanting from one to the other would be a major engineering exercise, and it's not something I'd want to attempt. There was some discussion about this on the CelicaSupra forums a while ago, from memory one of the yanks was putting a G series diff and housing in his MA61, but it was costing him mega-bucks (custom driveshafts, CV's etc).

If you're doing this for strength reasons, don't waste your time; an F series diff with a TrueTrac centre is more than strong enough for your application.
  Send a private message to this user    

SubjectPosterDate
Read Message   g series into ma61 swap...what do i neeed to do? V8_MA61Sun, 22 February 2004 10:41
Read Message   Re: g series into ma61 swap...what do i neeed to do? 7M-BrisbaneSun, 22 February 2004 11:22
Read Message   Re: g series into ma61 swap...what do i neeed to do? V8_MA61Sun, 22 February 2004 12:07
Read Message   Re: g series into ma61 swap...what do i neeed to do? V8_MA61Tue, 24 February 2004 08:36
Read Message   Re: g series into ma61 swap...what do i neeed to do?  NorbieWed, 25 February 2004 05:42
Read Message   Re: g series into ma61 swap...what do i neeed to do? V8_MA61Wed, 25 February 2004 10:14
Read Message   Re: g series into ma61 swap...what do i neeed to do? bbaacchhyyWed, 25 February 2004 21:10
Read Message   Re: g series into ma61 swap...what do i neeed to do? wilbo666Thu, 26 February 2004 00:11
Read Message   Re: g series into ma61 swap...what do i neeed to do? NorbieThu, 26 February 2004 04:25
Previous Topic:ECU pinouts for 4E-FTE??
Next Topic:quickie what size is the standard ra23 front anti roll bar?

Goto Forum:
-=] Back to Top [=-

Current Time: Mon Oct 7 20:33:48 UTC 2024

Total time taken to generate the page: 0.0054950714111328 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.