| Author | Topic |
|---|
I supported Toymods
Location:
Ademelaide, SA
Registered:
July 2003
|
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
Wed, 25 February 2004 12:28
 
|
 |
ok. here's the deal.
the only difference is the bellhousing.
bearings, gears....all the same.
stock ratio's, are as follows, though this is straight out of the Bible, which you actually have, Garth. 
1st - 3.587
2nd - 2.022
3rd - 1.384
4th - 1.000
5th - 0.861
Rev - 3.484
if you dont believe me, check on page 61 
as for being the same JDM/Aus....part no's are the same, according to my EPC, excluding the bellhousing of course...
(edit) JDM has 4.3:1 final, Aus is 3.9:1.
mine is 4.6:1
btw, matty, can you get your mate to give me a call about those struts, i need them ASAP...cheers!
[Updated on: Wed, 25 February 2004 12:30]
|
|
|
| | Subject | Poster | Date |
|---|
 |
[AE86] - Difference between AUS T-50 and JDM T-50
|
ae86drift | Tue, 24 February 2004 07:54 |
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
Panda Tofu ^_^ | Tue, 24 February 2004 08:25 |
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
ae86drift | Tue, 24 February 2004 08:29 |
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
TurboRA28 | Tue, 24 February 2004 10:40 |
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
NickAE86 | Wed, 25 February 2004 02:38 |
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
JDM hachi | Wed, 25 February 2004 06:03 |
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
Steve-AE86 | Wed, 25 February 2004 12:28 |
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
ae86drift | Wed, 25 February 2004 12:32 |
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
Steve-AE86 | Wed, 25 February 2004 12:33 |
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
Steve-AE86 | Wed, 25 February 2004 12:34 |
|
Re: [AE86] - Difference between AUS T-50 and JDM T-50
|
ae86drift | Wed, 25 February 2004 12:39 |
