| Author | Topic |
|---|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: Which flywheel and clutch?
|
Wed, 25 February 2004 23:04
|
 |
It's the 'lumps' on the outside of the GZE flywheel that are the issue. These are what the pressure plate bolts on to.
The 212mm flywheel can be found on later smallport and 20v 4AG's.
I used the setup I already mentioned for a little while, until the T50 shattered, then I used it agian (with a different clutch plate) on a W55, but the clutch died through a fault in the bellhousing, not a fault in the clutch itself  (do a search, I've had a damned good whinge about this before!)
|
|
|
