| Author | Topic |
|---|
Registered:
August 2002
|
|
Re: 2jz-ge in MX-73
|
Thu, 26 February 2004 23:37
|
 |
Norbie: 
Hehe Anyways, the 2J slotted straight into the MA61 no worries, again it transformed the car, a massive improvement even over a 6MGE that was in my previous MA61.
Fuel consumption is awesome but its not like that was a major factor, hell i drive a supra, if i wanted to use no petrol id buy a corolla. At a rough guess driving hard around the city about 200km to 25L, which is about 12.5L/100km. Its really good on the freeway as well.
No need to massage the firewall, plenty of 1J's running around in MX73's.
Do yourself a favour.....convert it to manual, it will be ALOT more enjoyable to drive with peak power at 6500rpm and peak torque at 4800rpm its a motor you have to rev and have to drive to get the best out of it. N/A JZA80 autos are totally uninspiring.
And the new power was nice, but now im searching for more, so it really depends hat your after, a nice cruiser or a balls to the wall performer. Im stuck in between.
Here is my conversion site:
http://www.norbie.net/ifli4u/
EDIT: The still have potential, much like a 1UZ, Gianttomato pulled 146rwkw with a motec ITB's and extractors + exhaust. I pulled 122rwkw with an exhaust and pod filter. A 1UZ on the same day pulled 125rwkw for comparison sake.
[Updated on: Thu, 26 February 2004 23:40]
|
|
|
| | Subject | Poster | Date |
|---|
 |
2jz-ge in MX-73
|
pannelvan_screema | Thu, 26 February 2004 14:21 |
|
Re: 2jz-ge in MX-73
|
Norbie | Thu, 26 February 2004 14:50 |
|
Re: 2jz-ge in MX-73
|
gianttomato | Thu, 26 February 2004 19:36 |
|
Re: 2jz-ge in MX-73
|
BlackSupra | Thu, 26 February 2004 23:37 |
