| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: Adjusting rear brake bias...
|
Sat, 06 March 2004 05:38
 
|
 |
OK, so we're talking about a slightly modified setup. That helps a lot. 
What is the diameter of the SA63 caliper pistons vis a vis the MX62 caliper pistons? If the SA63 pistons are bigger, then you will need more pedal travel to adequately activate the front - this may result in the backs locking up as line pressure still increases as before. Like Norbie said, best bet is to replace the master cylinder with an SA63 unit. If you still have rear brake lockup issues, I'd rekit the calipers and make sure they are 100% OK. Then I might consider an adjustable proprtioning valve.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Adjusting rear brake bias...
|
wilbo666 | Thu, 04 March 2004 08:20 |
|
Re: Adjusting rear brake bias...
|
Jayem | Thu, 04 March 2004 11:50 |
|
Re: Adjusting rear brake bias...
|
Jayem | Thu, 04 March 2004 12:02 |
|
Re: Adjusting rear brake bias...
|
bbaacchhyy | Thu, 04 March 2004 21:09 |
|
Re: Adjusting rear brake bias...
|
Scorpion | Thu, 04 March 2004 22:17 |
|
Re: Adjusting rear brake bias...
|
gianttomato | Thu, 04 March 2004 22:25 |
|
Re: Adjusting rear brake bias...
|
wilbo666 | Fri, 05 March 2004 03:41 |
|
Re: Adjusting rear brake bias...
|
Norbie | Fri, 05 March 2004 05:49 |
|
Re: Adjusting rear brake bias...
|
gianttomato | Sat, 06 March 2004 05:38 |
|
Re: Adjusting rear brake bias...
|
wilbo666 | Sun, 07 March 2004 02:26 |
|
Re: Adjusting rear brake bias...
|
ddeane | Mon, 08 March 2004 02:54 |
