F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » thermo switch placement Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
SeptemberSquallIndustries Forums Junkie Location: Melbourne Registered: August 2003	Re: thermo switch placement Mon, 08 March 2004 05:02 You shouldn't try to just poke the probe under the ring clamp, if the surface isn't smooth where the hose seals then it never will, hose clamp or none! Cut and shut a piece of pipe (only need be ~3") into the top hose and tap a thread for your temp probe into that. Make sure to leave at least 1" (preferrably more) for the hose to bite onto and consider belling the end of the pipe section (like OEM water fittings) to ensure a secure join. If your stock temp sender (for dash guage) has an output signal compatible with your switch you could splice in and use that for your signal. [Report message to a moderator]

	Subject	Poster	Date
	thermo switch placement	bmak	Sun, 07 March 2004 05:48
	Re: thermo switch placement	FKN16V	Sun, 07 March 2004 10:53
	Re: thermo switch placement	bmak	Sun, 07 March 2004 10:58
	Re: thermo switch placement	FKN16V	Sun, 07 March 2004 11:07
	Re: thermo switch placement	Cool1	Sun, 07 March 2004 11:13
	Re: thermo switch placement	clubagreenie	Sun, 07 March 2004 11:33
	Re: thermo switch placement	stylez	Mon, 08 March 2004 03:55
	Re: thermo switch placement	SeptemberSquallIndustries	Mon, 08 March 2004 05:02
	Re: thermo switch placement	clubagreenie	Mon, 08 March 2004 06:59
	Re: thermo switch placement	ed_ma61	Mon, 08 March 2004 09:41
	Re: thermo switch placement	people100	Mon, 08 March 2004 10:48
	Re: thermo switch placement	bmak	Mon, 08 March 2004 11:10
	Re: thermo switch placement	people100	Mon, 08 March 2004 10:46
	Re: thermo switch placement	FKN16V	Mon, 08 March 2004 11:10
	Re: thermo switch placement	ed_ma61	Mon, 08 March 2004 11:31
	Re: thermo switch placement	FKN16V	Mon, 08 March 2004 12:13
	Re: thermo switch placement	bmak	Mon, 08 March 2004 12:24
	Re: thermo switch placement	oldcorollas	Mon, 08 March 2004 12:24
	Re: thermo switch placement	ed_ma61	Mon, 08 March 2004 12:24
	Re: thermo switch placement	thechuckster	Mon, 08 March 2004 12:43

Previous Topic:	4AGE: Big cam = hotter engine?
Next Topic:	4age help needed!

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.