F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Pistons past the crank on a 7MGTE Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Guest	Re: Pistons past the crank on a 7MGTE Thu, 22 August 2002 08:23 Pete, surely you'd wanna have a look at your head if you were gunna rebuild it ?? with your hardware it would be plain irresponsible to reassemble without a once over. Do you even know the cause of your low compression/leak ?? it could be a burnt valve or even head gasket blown between cylinders. Has your enginealready got forgies ?? if so then pull it apart, & rebuild, I wanna see you run that 25 psi you were talking about!!! Matt [Report message to a moderator]

	Subject	Poster	Date
	Pistons past the crank on a 7MGTE	SupraPete	Thu, 22 August 2002 05:22
	Re: Pistons past the crank on a 7MGTE	gianttomato	Thu, 22 August 2002 05:37
	Re: Pistons past the crank on a 7MGTE		Thu, 22 August 2002 08:23
	Re: Pistons past the crank on a 7MGTE	SupraPete	Thu, 22 August 2002 09:07
	Re: Pistons past the crank on a 7MGTE		Thu, 22 August 2002 11:10
	Re: Pistons past the crank on a 7MGTE	SupraPete	Fri, 23 August 2002 03:06
	Re: Pistons past the crank on a 7MGTE	SUPRAGTE	Fri, 23 August 2002 03:18
	Re: Pistons past the crank on a 7MGTE	SupraPete	Fri, 23 August 2002 06:27
	Re: Pistons past the crank on a 7MGTE	Techie_Mark	Sat, 24 August 2002 11:22

Previous Topic:	GZE Problem??
Next Topic:	Is JDM extractor good?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.