| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: exhaust for 7mge ma70
|
Mon, 08 March 2004 13:19
 
|
 |
2.5" is about right, any bigger than that will be heaps louder with little or no benefit. You might want to consider a 3" dump into a 3" cat and then narrowing to a 2.5" cat-back system, but it depends on the size of the outlet on your extractors (no point going larger). Remember the first metre or so of your exhaust is the important bit, the rest is just there to channel the gases away from the passengers.
As for mandrel bending, I'd only bother pre-cat... after that press-bending will be fine. There aren't any sharp bends in an MA70 exhaust anyway.
|
|
|
| | Subject | Poster | Date |
|---|
 |
exhaust for 7mge ma70
|
V8_MA61 | Mon, 08 March 2004 08:37 |
|
Re: exhaust for 7mge ma70
|
BlackSupra | Mon, 08 March 2004 10:16 |
|
Re: exhaust for 7mge ma70
|
justcallmefrank | Mon, 08 March 2004 10:50 |
|
Re: exhaust for 7mge ma70
|
V8_MA61 | Mon, 08 March 2004 11:41 |
|
Re: exhaust for 7mge ma70
|
thechuckster | Mon, 08 March 2004 12:52 |
|
Re: exhaust for 7mge ma70
|
V8_MA61 | Mon, 08 March 2004 12:58 |
|
Re: exhaust for 7mge ma70
|
thechuckster | Mon, 08 March 2004 13:11 |
|
Re: exhaust for 7mge ma70
|
rebbot | Wed, 10 March 2004 08:18 |
|
Re: exhaust for 7mge ma70
|
Norbie | Mon, 08 March 2004 13:19 |
|
Re: exhaust for 7mge ma70
|
BlackSupra | Mon, 08 March 2004 13:59 |
