| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
Re: ra28 dash: pulling the top off
|
Tue, 09 March 2004 07:49
 
|
 |
flynn21atwork has a good point, be very carefull because these dashes aint easy to come by even in a repairable condition let alone good condition and if it is in peices u cant fix it. Be sure that if you do take the dash pad of that wat holds it to the dash its about 6 or seven nuts, undo these but you also will have to take out the grub screw which you fasten the nuts to with a alan key, these just screw out. If you dont take out the grub screws you will end up with it in peices.
GOOD LUCK
|
|
|
| | Subject | Poster | Date |
|---|
 |
ra28 dash: pulling the top off
|
ehendrikd | Tue, 09 March 2004 03:10 |
|
Re: ra28 dash: pulling the top off
|
coronamark2 | Tue, 09 March 2004 03:24 |
|
Re: ra28 dash: pulling the top off
|
flynn21atwork | Tue, 09 March 2004 03:58 |
|
Re: ra28 dash: pulling the top off
|
Fattony | Tue, 09 March 2004 07:49 |
|
Re: ra28 dash: pulling the top off
|
gold28 | Wed, 10 March 2004 02:36 |
|
Re: ra28 dash: pulling the top off
|
CLG | Wed, 10 March 2004 02:50 |
|
Re: ra28 dash: pulling the top off
|
ehendrikd | Wed, 10 March 2004 03:20 |
|
Re: ra28 dash: pulling the top off
|
coronamark2 | Wed, 10 March 2004 03:34 |
|
Re: ra28 dash: pulling the top off
|
ehendrikd | Wed, 10 March 2004 03:40 |
|
Re: ra28 dash: pulling the top off
|
gold28 | Wed, 10 March 2004 20:31 |
|
Re: ra28 dash: pulling the top off
|
Fattony | Thu, 11 March 2004 06:40 |
