Toymods Car Club Inc: Tech & Conversions => AE86 Sprinter SR20DET conversion?

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » AE86 Sprinter SR20DET conversion? Show: Today's Posts :: Show Polls Email to friend

Author

Topic

FKN16V
Forums Junkie

Location:
NSW, East Coast
Registered:
July 2003

Re: AE86 Sprinter SR20DET conversion?

Tue, 09 March 2004 13:13

improvedae86 wrote on Tue, 09 March 2004 22:05

" engine bols straight in "

And where does it sit , and what is the weight ratio front to rear with the engine on the toyota cross member which lasts about five minutes before the spot welds start coming apart , engine mount are on a 15' different angle ! , And where is the cam cover go , though the bonnet ?, if not , wheres the steering rack go ? or do you convert it back to worn gear drag link set up . sorry to say this is not the case , and you will never get in engineered with the engine in that position ..

"it's that easy"

cool you can do the next one for me 20b ae86 ..
I will give you say $8g , no $10g it will be more than the sr conversion ...

And i expect it to handle , stop , accelerate it the wet , and to go for three months of trashing with not a single problem or breakage .. and go around pi at 1.48-1.50mins all day ..

Can you do this ?

No modification to crossmember , still cannot get over this one

Who do you work for ?

Please tell ....

Please don't steer people in the direction of spending shit loads of money and time if you have not personal done this conversion .. they will be better of building a 4agte

Sorry people , just get pissed of at the amount of misinformation on this topic , due to have to do all the research and work myself , and have lots of time wasted by people think that its done this way or that way ... if you don't know don't waste peoples time .. and i thought businesses where not to advertise on the forums unless they are a supporter of toymods ..........

Hanjin

Which state you in ? If you still want to do this pm me your details .

Perhaps you should check things before you shoot your big mouth off? http://forums.toymods.org.au/index.php?t=msg&t h=30747&start=0&rid=3118&S=6c8edf3988b dd4e5c238280a10e9f2b0

Edit: and then there's Rob (im pretty sure that was his name) from the sprinter cruise with the white ae86 with a sr20det that also said it wasnt all that hard to do!

[Updated on: Tue, 09 March 2004 13:16]

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Sat Oct 26 19:27:01 UTC 2024

Total time taken to generate the page: 0.0051000118255615 seconds

.:: Contact :: Home ::.