| Author | Topic |
|---|
Location:
Redbank Plains,near Ipswi...
Registered:
May 2002
|
|
Re: FS: 3S-GTE Gen 3 cams
|
Wed, 10 March 2004 06:55
 
|
 |
|
the gen 3 cams have 1.6mm more lift on the inlets only and 12 degrees more duration on both inlet & exhaust. on the face of it, they are a good and simple mod. However, the base circle on the cam is NOT identical to the gen 2 engine. therfore whilst they will physically bolt in, you will have to re-shim the entire head. I have encountered 1 gen 2 head where the extra lift was too much for the casting (cam hits it) and we had to relieve the alloy on the edge of the lifter bore. the gen 3 head is quite different in this area to allow for more lift. Of course, the extra lift may , on rare occassions at high revs, cause a shim to flick out. This is exacerbated by the acceleration ramps on the Gen 3 cams , which are more agressive (ie they open faster). I dont want to pour cold water on someones sale, but beware, there are some traps with 'simple" jobs
|
|
|
| | Subject | Poster | Date |
|---|
 |
FS: 3S-GTE Gen 3 cams
|
94mr2turbo | Sat, 21 February 2004 07:37 |
|
Re: FS: 3S-GTE Gen 3 cams
|
Cool1 | Sat, 21 February 2004 08:54 |
|
Re: FS: 3S-GTE Gen 3 cams
|
Classique71 | Sat, 21 February 2004 11:39 |
|
Re: FS: 3S-GTE Gen 3 cams
|
94mr2turbo | Sun, 22 February 2004 01:55 |
|
Re: FS: 3S-GTE Gen 3 cams
|
Classique71 | Sun, 22 February 2004 02:30 |
|
Re: FS: 3S-GTE Gen 3 cams
|
Cool1 | Sun, 22 February 2004 01:57 |
|
Re: FS: 3S-GTE Gen 3 cams
|
94mr2turbo | Sun, 22 February 2004 02:08 |
|
Re: FS: 3S-GTE Gen 3 cams
|
Cool1 | Sun, 22 February 2004 02:09 |
|
Re: FS: 3S-GTE Gen 3 cams
|
94mr2turbo | Sun, 22 February 2004 22:06 |
|
Re: FS: 3S-GTE Gen 3 cams
|
Classique71 | Mon, 23 February 2004 01:11 |
|
Re: FS: 3S-GTE Gen 3 cams
|
94mr2turbo | Tue, 24 February 2004 03:20 |
|
Re: FS: 3S-GTE Gen 3 cams
|
Classique71 | Tue, 24 February 2004 07:47 |
|
Re: FS: 3S-GTE Gen 3 cams
|
no_tofu_speed | Tue, 24 February 2004 14:08 |
|
Re: FS: 3S-GTE Gen 3 cams
|
Classique71 | Wed, 25 February 2004 01:22 |
|
Re: FS: 3S-GTE Gen 3 cams
|
94mr2turbo | Thu, 26 February 2004 05:03 |
|
Re: FS: 3S-GTE Gen 3 cams
|
Classique71 | Tue, 09 March 2004 07:30 |
|
Re: FS: 3S-GTE Gen 3 cams
|
94mr2turbo | Tue, 09 March 2004 22:17 |
|
Re: FS: 3S-GTE Gen 3 cams
|
TerryOBeirne | Wed, 10 March 2004 06:55 |
|
Re: FS: 3S-GTE Gen 3 cams
|
94mr2turbo | Wed, 10 March 2004 22:41 |
|
Re: FS: 3S-GTE Gen 3 cams
|
TerryOBeirne | Thu, 11 March 2004 03:55 |
|
Re: FS: 3S-GTE Gen 3 cams
|
Toobs | Wed, 10 March 2004 23:36 |
|
Re: FS: 3S-GTE Gen 3 cams
|
MR2 3SGTE | Thu, 11 March 2004 04:55 |
