Author | Topic |
Location: Sydney
Registered: March 2003
|
Re: jza70 - oil pump or bearings?
|
Wed, 10 March 2004 20:38
|
|
Regarding resizing the rods - resizing the rods ensures proper bearing crush is maintained, something which can be effected by the changing of rod bolts.
Crank pin diamter ranges from 51.982 to 52.000mm depending on the marking number on the crank.
Full specs of the 2jz can be found on the mkiv.com site
http://www.mkiv.com/manual/manualtt/engine_service _specifications/index.htm
|
|
|