| Author | Topic |
|---|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: A/C on a 4agte
|
Thu, 11 March 2004 12:12
 
|
 |
| fatmr2 wrote on Thu, 11 March 2004 21:22 |
I think the reason i cant get shit to fit is cause i havent finished the engine mount yet and i cant jack the car high enough to get under there properly. I better have it done this weekend! 
|
buy some cheap ramps man, i couldnt live with-out mine. 
what you doing to your mount?
| Quote: |
With your oil filter, do you just take the filter off and remove the two plates and the filter will screw straight on or whats the go with that?
|
i took the bolt that the filter screws to off the outer plate, put a washer on it and bolted it onto the block where the sandwhich plates where (i put a washer on to bring a little more thread out for the filter).
| Quote: |
Cause I'm thinking of getting an oil filter relocation kit.
I'm hoping that will clear up a fair bit of space.
|
well that to would be good, if you got some spare cash.
| Quote: |
Also, you know on the na sump how you have that oil return line that pokes out of the sump? I was thinking, could i take that sump off and put it on the 4agze and use it for an oil return line for the turbo???  Saves me having to tap the sump?!
|
yeah, you could do that. make sure you get a straight fitting to screw into it though. that banjo fitting i would think as a restriction for the oil return.
| Quote: |
There is so much to consider with all of this 
|
yep, but it's not that hard... 
|
|
|
