| Author | Topic |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
Help with offset question
|
Fri, 12 March 2004 01:04
|
 |
Hello, I know this question has been discussed before and there are references to it on the net, but i'm still struggling to work it out.
If I have a rear axle hub face to hub face that is 1310mm wide.
Now if I put on 7" (175mm) wheels with a +35mm offset.
Would that give me a track width of 1410mm or there abouts?
I got that figure from.. 175mm / 2 = 87.5mm. A positive offset of +35mm would make the mounting face at 52.5mm from the center of the wheel? So add 52.5mm to each side and ended up with 1414mm or there abouts?
Is that correct? Or am I way off?
Thanks
Joel
|
|
|
| | Subject | Poster | Date |
|---|
 |
Help with offset question
|
TurboRA28 | Fri, 12 March 2004 01:04 |
|
Re: Help with offset question
|
Norbie | Fri, 12 March 2004 01:16 |
|
Re: Help with offset question
|
bbaacchhyy | Fri, 12 March 2004 02:17 |
|
Re: Help with offset question
|
ra23celica | Fri, 12 March 2004 06:30 |
|
Re: Help with offset question
|
TurboRA28 | Mon, 03 May 2004 00:16 |
|
Re: Help with offset question
|
ra23celica | Mon, 03 May 2004 00:46 |
|
Re: Help with offset question
|
TurboRA28 | Mon, 03 May 2004 02:08 |
|
Re: Help with offset question
|
ra23celica | Mon, 03 May 2004 02:17 |
|
Re: Help with offset question
|
ae86drift | Mon, 03 May 2004 02:30 |
|
Re: Help with offset question
|
TurboRA28 | Mon, 03 May 2004 02:31 |
|
Re: Help with offset question
|
ra23celica | Mon, 03 May 2004 06:32 |
|
Re: Help with offset question
|
TurboRA28 | Mon, 03 May 2004 06:42 |
|
Re: Help with offset question
|
ra23celica | Mon, 03 May 2004 06:51 |
|
Re: Help with offset question
|
TurboRA28 | Mon, 03 May 2004 06:54 |
|
Re: Help with offset question
|
ra23celica | Mon, 03 May 2004 07:03 |
