Author | Topic |
Location: Kita-Ku, Sapporo, Japan
Registered: January 2003
|
Re: 2 pin flasher unit
|
Fri, 12 March 2004 06:50
|
|
probably... turn the indicator switch on, then measure continuity from the flasher can output, to ground..
on my rolla (KE15) the flasher can is BEFORE the switch, which is why it only has 2 pins... since it flashes for both 'channels'
if it is after the switch, then you need flasher for each channel (sometime sin same can as lambolica said)
Cya, Stewart
|
|
|