F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 20 valve black top ae86 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
jasonp1977 Regular Location: Brisbane Registered: May 2002	Re: 20 valve black top ae86 Fri, 12 March 2004 13:03 the blacktop loom isn't all that hard once you strip out all the un-necessary stuff, you are left with basically JUST the engine loom from the blacktop after all the other garbage is removed, and then you simply splice this into your existing body/ignition/charge looms. Took me about 3 nights after work to do, but I checked every wire in the loom... The thing fired first go with all the instrumentation etc working perfectly. The padandwheels site is very good, there's only a couple of mistakes there in his pinouts which are pretty obvious when you check your loom with the multimeter. Mine went from a mess like this: http://www.rollamods.com/project20V/wiring2.jpg To a much neater "plug and play" harness like this: http://www.rollamods.com/project20V/wiring3.jpg The extra wires in the pic near the ECU were integrated into the F2 plug for the body harness, it turned out extremely neat in the end, just like factory. [Report message to a moderator]

	Subject	Poster	Date
	20 valve black top ae86	Drifted	Fri, 26 December 2003 16:45
	Re: 20 valve black top ae86	de_rift	Sat, 27 December 2003 02:28
	Re: 20 valve black top ae86	Matt20v	Sat, 27 December 2003 03:55
	Re: 20 valve black top ae86	Drifted	Sat, 27 December 2003 06:37
	Re: 20 valve black top ae86	Drifted	Sun, 28 December 2003 17:57
	Re: 20 valve black top ae86	FKN16V	Mon, 29 December 2003 01:11
	Re: 20 valve black top ae86	Drifted	Sat, 03 January 2004 17:18
	Re: 20 valve black top ae86	slydar	Mon, 05 January 2004 03:41
	Re: 20 valve black top ae86	ae8620v	Fri, 12 March 2004 12:21
	Re: 20 valve black top ae86	jasonp1977	Fri, 12 March 2004 13:03

Previous Topic:	Why do people want high power car??
Next Topic:	ae 86 help

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.