| Author | Topic |
|---|
Location:
Tasmania
Registered:
May 2002
|
|
Re: clutch
|
Wed, 22 May 2002 14:55
 
|
 |
The fork, bellhousing, bearing, clutch, plate, slave cylinder all came from the same car (TE72), and it was working fine before. THere is no adjustment at the pivot or slave cylinder, and the fork is not bent. The slave cylinder is now honed with new seals, didn't fix the problem. I don't think the master cylinder creaps. I has to be the preasure plate some how.
So I will get the flywheel off too, replace rear seal. Machine flywheel? Not nessesary I think.
|
|
|
