Author | Topic |
Location: Melbourne
Registered: April 2003
|
Re: JDM 4AGE 100kw vs. AUS spec
|
Fri, 19 March 2004 17:41

|
 |
a stock 100kw 4age with slide around corners, but the only way u'll make it slide, unless ur a special driver, is with a LSD... get one, and have some fun
Aus spec 100kw had a knock sensor, i believe, didn't have a speed cut either, not sure about internals, but i can't see there being many differances...
Performance wise, exhaust and filter are part of the conversion into the AE86, but making the filter CAI and boxed is the main thing to look into, relocate the water overflow, and window washer bottle,
overflow fits next to battery
window washer - get one from a wrecker that would suit the location you want, or even better a JDM AE86 washer bottle, but $$$
get the motor running first, then get some cams, not any higher than 278 and some adjustable cam gears... and tune the damn thing,
also a main thing with these motors is gearing, i've heard JDM T50s have better shorter gearing compared to the long T50 aus spec gears, but don't qoute me on that.... also a T series rear end with a 4.1 or 4.3 will help out alot..
|
|
|