| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 4age o2 sensor
|
Sun, 21 March 2004 05:42
 
|
 |
i pm'd him 
just keep in mind that the single wire will need to be within a maximum of about 1.5 feet from head for an unheated sensor, and pretty much anywhere on the extractors for a heated one.
also remember to make sure the sensor is pointing upwards (so water will not collect in it inside the exhaust pipe) water in the sensor when it heats up can destroy the zirconia sensor.
just put the flange wherever it fits, pointing up, and as close to the head as needed for the type you use.
Cya, Stewart
|
|
|
