Author | Topic |
Registered: January 2004
|
Re: 1jz dyno... whats wrong!?
|
Tue, 23 March 2004 17:00

|
 |
Finally got my car tuned on the dyno and all went well!
Turned out it was mainly a case of the boost map being very bad, but also fuelling. I recently had to replace the haltech boost solenoid, and I guess its properties were very different, I couldn't tell from my gauge, but after I hit the defined boost it dropped away reasonably significantly..
Anyhow, got the boost map set, and ran at 14 psi, afr set to around 12, getting slightly richer at 6000+ rpm and timing set. All took about 4 hrs, but got a much better result than I had hoped for! 320 hp and 330 ft/lb torque at the hubs, I benefitted from a bitterly cold day though.
will post up the plot shortly..
just very pleased is all sorted now!
|
|
|
| Subject | Poster | Date |
 |
1jz dyno... whats wrong!?
|
240jz | Wed, 03 March 2004 16:25 |
 |
Re: 1jz dyno... whats wrong!?
|
lumpy | Wed, 03 March 2004 22:50 |
 |
Re: 1jz dyno... whats wrong!?
|
Celia-Sue | Thu, 04 March 2004 02:50 |
 |
Re: 1jz dyno... whats wrong!?
|
240jz | Thu, 04 March 2004 11:13 |
 |
Re: 1jz dyno... whats wrong!?
|
HedgehogSandwich | Thu, 04 March 2004 12:32 |
 |
Re: 1jz dyno... whats wrong!?
|
3T-GTE | Fri, 05 March 2004 03:46 |
 |
Re: 1jz dyno... whats wrong!?
|
wil8115 | Tue, 09 March 2004 08:24 |
 |
Re: 1jz dyno... whats wrong!?
|
240jz | Tue, 09 March 2004 09:47 |
 |
Re: 1jz dyno... whats wrong!?
|
wil8115 | Tue, 09 March 2004 10:44 |
 |
Re: 1jz dyno... whats wrong!?
|
240jz | Tue, 23 March 2004 17:00 |
 |
Re: 1jz dyno... whats wrong!?
|
wil8115 | Tue, 23 March 2004 19:08 |
 |
Re: 1jz dyno... whats wrong!?
|
240jz | Wed, 24 March 2004 09:31 |
 |
Re: 1jz dyno... whats wrong!?
|
celicamad | Wed, 24 March 2004 10:04 |
 |
Re: 1jz dyno... whats wrong!?
|
240jz | Wed, 24 March 2004 14:37 |
 |
Re: 1jz dyno... whats wrong!?
|
celicamad | Wed, 24 March 2004 20:49 |
 |
Re: 1jz dyno... whats wrong!?
|
240jz | Thu, 25 March 2004 09:39 |