F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1jz with jdm 2jz map sensor upgrade n 550cc injecters Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
robs Regular Location: nz Registered: July 2003	1jz with jdm 2jz map sensor upgrade n 550cc injecters Wed, 24 March 2004 10:08 Hi ev 1 this was brought up on a thread awile ago was wonderin if any one has done it and awt the results were like ive found a 2jz map sensor but the guy whos got it is using a 3bar map on his 2jz with fact computer export 550s no aditional pigybaks or computers this can b found at www.mkiv.com.nz members kevin auckland this is a cut out of that page. I dyno'd my car at Bellars Motor Works on February 6th, 2004 and achieved 360.8 rwkw on their brand new Dyno Dynamics dyno at 22psi boost. This is after sorting out all the gremlins in my Garrett GT3540 single turbo installation. This power level is now at the limit of the stock USA 550cc injectors and requires two Jap Supra in-tank pumps to supply enough fuel. This is on a 100% internally stock Japanese Supra (2JZ-GTE) engine (its never been opened), showing just how strong these engines are from the factory. I'm also still running the factory flywheel, clutch and pressure plate, which has survived a number of 4000-6000+ rpm launches at the drags so far on Mickey Thompson ET Street drag slicks. This setup is still using the factory ECU with no fuel or ignition controllers and it runs it very well, although a fully programable ECU could probably run it a bit better. there are dyno graphs on the page im not very computer savy couldnt fig how to put a link directly to it sorry. on the old thread it said to use the 2jz map but he reckons to use a after market 3bar sensor. im alil confused any help apreciated [Report message to a moderator]

	Subject	Poster	Date
	1jz with jdm 2jz map sensor upgrade n 550cc injecters	robs	Wed, 24 March 2004 10:08
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	HedgehogSandwich	Wed, 24 March 2004 23:22
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	Norbie	Wed, 24 March 2004 23:32
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	lumpy	Wed, 24 March 2004 23:43
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	E30-323ti	Thu, 25 March 2004 04:25
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	robs	Thu, 25 March 2004 07:45
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	Norbie	Thu, 25 March 2004 08:51
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	robs	Thu, 25 March 2004 10:03
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	HedgehogSandwich	Thu, 25 March 2004 11:24
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	Chris Davey	Thu, 25 March 2004 11:53
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	Manny	Thu, 25 March 2004 12:18
	Re: 1jz with jdm 2jz map sensor upgrade n 550cc injecters	wastegate	Fri, 26 March 2004 00:29

Previous Topic:	Crank Angle censor in 3t-gte
Next Topic:	JZA70 intercooler, what should i do.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.