| Author | Topic |
|---|
Location:
Gold Coast
Registered:
May 2002
|
|
Re: JZA70 intercooler, what should i do.
|
Thu, 25 March 2004 00:45
 
|
 |
| alwaysRA23 wrote on Thu, 25 March 2004 11:34 |
THAT is one mean intercooler!
is it generic or custom made!!!
|
Alittle bit of both. It's the Hotchilli range from A.R.E but have the custom inlet outlet for the piping.
| Quote: |
what sort of improvements did it make to ur performance!
|
I'd say abit but I don't know as I never ran the car with the stocker. Basicaly as soon as I got it I but the cooler on.
| Quote: |
how much did that setup cost?
|
$1200 for the cooler
$252 for the SS piping
4 x 63.50mm x 1.6mm 304 90 DEG BENDS
4 x 76.20mm x 1.6mm 304 90 DEG BENDS
1 x 63.50mm x 1.6mm 304 45 DEG BEND
1 MTR 63.50mm x 1.6mm 304W TUBE
1 MTR 76.20mm x 1.6mm 304W TUBE
$300 for the silicon and bolt clamps.
Silicon was expensive at $150 for enough in both 2.5" and 3"
The SS bolt clamps were expensive too.
I got a good friend to Tig Weld them for me after I cut and taped up the piping to fit.
Expensive but it's going to support 600hp.
|
|
|
| | Subject | Poster | Date |
|---|
 |
JZA70 intercooler, what should i do.
|
alwaysRA23 | Wed, 24 March 2004 23:26 |
|
Re: JZA70 intercooler, what should i do.
|
SprinterBoy | Thu, 25 March 2004 00:13 |
|
Re: JZA70 intercooler, what should i do.
|
alwaysRA23 | Thu, 25 March 2004 00:15 |
|
Re: JZA70 intercooler, what should i do.
|
wastegate | Thu, 25 March 2004 00:29 |
|
Re: JZA70 intercooler, what should i do.
|
alwaysRA23 | Thu, 25 March 2004 00:34 |
|
Re: JZA70 intercooler, what should i do.
|
wastegate | Thu, 25 March 2004 00:45 |
|
Re: JZA70 intercooler, what should i do.
|
spans | Thu, 25 March 2004 15:22 |
|
Re: JZA70 intercooler, what should i do.
|
wastegate | Fri, 26 March 2004 00:20 |
