F.A.Q.    Register    Login    Home Members    Search

Toymods » General Car Talk » Who said 7M, had no potential?? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
STR8 2.8 Forums Junkie Location: Sydney Registered: February 2003	Re: Who said 7M, had no potential?? Mon, 29 March 2004 14:20 dug up and article from fast fours when this car was making 565kw@8100 and 12.48@133mph. Internals: block: decked; torque plate bore and hone with plateau brush; i beam rods; rod bolts; floating forged pistons; gapless rings; head and mains studs; crank been stress relieved, cross drilled, tuftrided, index ground; heavily modded oil pump. Head: hardened and annealed; standard valves with seven angle seats, pleanty of porting, aftermarket cams, trd valve springs, hks 1.0mm mhg, 8.5:1 CR Induction: ta51 garret, custom tube and fin cooler, custom 10 litre plenum with bell mouths, 3inch cooler piping, 4 litre surge tank, holley 15psi pre pump, 2x044 bosch pumps, 1/2in feed fuel line, 3/8in return line, 1000cc injectors, malpassi fuel pressure reg. Management: motec m48, 5 core radiator Exhaust: port matched, tuned length, twin entry, split pulse manifold, 45mm external gate, 3.5in turbo to cat, 3in cat to tip, 3.5in cat, single 3in muffler Drivetrain: Supra 5 speed, triple plate clutch, standard diff, 3.5in tailshaft, standard brakes Suspension: bilstein struts with 3in lowered kings [Report message to a moderator]

	Subject	Poster	Date
	Who said 7M, had no potential??	KOFFEE-BLACK	Mon, 29 March 2004 12:15
	Re: Who said 7M, had no potential??	ed_ma61	Mon, 29 March 2004 14:03
	Re: Who said 7M, had no potential??	STR8 2.8	Mon, 29 March 2004 14:20
	Re: Who said 7M, had no potential??	bbaacchhyy	Mon, 29 March 2004 22:16
	Re: Who said 7M, had no potential??	lumpy	Mon, 29 March 2004 23:37
	Re: Who said 7M, had no potential??	bbaacchhyy	Tue, 30 March 2004 02:00
	Re: Who said 7M, had no potential??	Norbie	Tue, 30 March 2004 03:51
	Re: Who said 7M, had no potential??	Clown	Tue, 30 March 2004 04:43
	Re: Who said 7M, had no potential??	UUP-46X	Tue, 30 March 2004 00:25
	Re: Who said 7M, had no potential??	draven	Tue, 30 March 2004 02:01
	Re: Who said 7M, had no potential??	bbaacchhyy	Tue, 30 March 2004 02:13
	Re: Who said 7M, had no potential??	KOFFEE-BLACK	Tue, 30 March 2004 06:02
	very interesting............	MS-75	Tue, 30 March 2004 06:19
	Re: very interesting............	Norbie	Tue, 30 March 2004 06:58
	Re: Who said 7M, had no potential??	coronamark2	Tue, 30 March 2004 06:30
	Re: Who said 7M, had no potential??	BlackSupra	Tue, 30 March 2004 07:06
	Re: Who said 7M, had no potential??	torque	Tue, 30 March 2004 09:15
	Re: Who said 7M, had no potential??	DOR-186	Tue, 30 March 2004 09:36
	Re: Who said 7M, had no potential??	twincam_ke20	Tue, 30 March 2004 11:32
	Re: Who said 7M, had no potential??	CussCuss	Thu, 01 April 2004 05:03
	Re: Who said 7M, had no potential??	Caledwvech	Thu, 01 April 2004 05:08
	Re: Who said 7M, had no potential??	lumpy	Thu, 01 April 2004 05:11
	Re: Who said 7M, had no potential??	justcallmefrank	Thu, 01 April 2004 05:50
	Re: Who said 7M, had no potential??	coronamark2	Thu, 01 April 2004 05:52
	Re: Who said 7M, had no potential??	lumpy	Thu, 01 April 2004 06:34
	Re: Who said 7M, had no potential??	Norbie	Thu, 01 April 2004 06:36
	Re: Who said 7M, had no potential??	gianttomato	Thu, 01 April 2004 10:08
	Re: Who said 7M, had no potential??	Allan	Sun, 04 April 2004 11:19
	Re: Who said 7M, had no potential??	gianttomato	Sun, 04 April 2004 13:20
	Re: Who said 7M, had no potential??	Allan	Sun, 04 April 2004 16:18
	Re: Who said 7M, had no potential??	V8_MA61	Sat, 03 April 2004 10:10
	Re: Who said 7M, had no potential??	ed_ma61	Sun, 04 April 2004 12:39
	Re: Who said 7M, had no potential??	alwaysRA23	Sun, 04 April 2004 13:46
	Re: Who said 7M, had no potential??	nitephyre	Sat, 10 April 2004 00:03
	Re: Who said 7M, had no potential??	7M-Brisbane	Sun, 11 April 2004 03:12

Previous Topic:	SUBZERO supra runs 9.3!
Next Topic:	im looking for a celica, these are my options

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.