| Author | Topic |
|---|
Location:
1st street on the right
Registered:
November 2002
|
|
Re: removing spigit bearing from 18r engine
|
Thu, 08 April 2004 23:49
 
|
 |
|
I've always used a slide hammer with a hooked end to get in behind, the bush should be shorter than the depth of it's hole, it should pull out. Just remember to work around the circumference of the bush as you pull.
|
|
|
| | Subject | Poster | Date |
|---|
 |
removing spigit bearing from 18r engine
|
people100 | Thu, 08 April 2004 23:33 |
|
Re: removing spigit bearing from 18r engine
|
clubagreenie | Thu, 08 April 2004 23:49 |
|
Re: removing spigit bearing from 18r engine
|
wilbo666 | Fri, 09 April 2004 09:05 |
|
Re: removing spigit bearing from 18r engine
|
suthol | Fri, 09 April 2004 11:45 |
|
Re: removing spigit bearing from 18r engine
|
people100 | Fri, 09 April 2004 11:50 |
|
Re: removing spigit bearing from 18r engine
|
Mr DOHC | Fri, 09 April 2004 12:17 |
|
Re: removing spigit bearing from 18r engine
|
people100 | Fri, 09 April 2004 12:18 |
|
Re: removing spigit bearing from 18r engine
|
Mr DOHC | Fri, 09 April 2004 12:24 |
|
Re: removing spigit bearing from 18r engine
|
people100 | Fri, 09 April 2004 12:25 |
|
Re: removing spigit bearing from 18r engine
|
Mr DOHC | Fri, 09 April 2004 12:32 |
|
Re: removing spigit bearing from 18r engine
|
people100 | Fri, 09 April 2004 12:34 |
|
Re: removing spigit bearing from 18r engine
|
earlyrolla | Fri, 09 April 2004 13:37 |
|
Re: removing spigit bearing from 18r engine
|
suthol | Fri, 09 April 2004 21:40 |
