F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » removing spigit bearing from 18r engine Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
earlyrolla Regular Location: Perth Registered: May 2003	Re: removing spigit bearing from 18r engine Fri, 09 April 2004 13:37 The grease acts as the medium, the bolt should slide through the spigot. You use the bolt to 'hydraulic' out the spigot. The grease compresses as you hit the bolt INWARDS with a hammer and the spigot is pushed outwards. A little messy but very effect. You will need to repack the hole a few times as you go. Even better used a stuffed input shaft from and old box instead of a bolt. [Report message to a moderator]

	Subject	Poster	Date
	removing spigit bearing from 18r engine	people100	Thu, 08 April 2004 23:33
	Re: removing spigit bearing from 18r engine	clubagreenie	Thu, 08 April 2004 23:49
	Re: removing spigit bearing from 18r engine	wilbo666	Fri, 09 April 2004 09:05
	Re: removing spigit bearing from 18r engine	suthol	Fri, 09 April 2004 11:45
	Re: removing spigit bearing from 18r engine	people100	Fri, 09 April 2004 11:50
	Re: removing spigit bearing from 18r engine	Mr DOHC	Fri, 09 April 2004 12:17
	Re: removing spigit bearing from 18r engine	people100	Fri, 09 April 2004 12:18
	Re: removing spigit bearing from 18r engine	Mr DOHC	Fri, 09 April 2004 12:24
	Re: removing spigit bearing from 18r engine	people100	Fri, 09 April 2004 12:25
	Re: removing spigit bearing from 18r engine	Mr DOHC	Fri, 09 April 2004 12:32
	Re: removing spigit bearing from 18r engine	people100	Fri, 09 April 2004 12:34
	Re: removing spigit bearing from 18r engine	earlyrolla	Fri, 09 April 2004 13:37
	Re: removing spigit bearing from 18r engine	suthol	Fri, 09 April 2004 21:40

Previous Topic:	Polyurethane Injection
Next Topic:	What is light/heavy/average weight of a 15 inch alloy?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.