Toymods Car Club Inc: Tech & Conversions => Hilux Calip Conversion and Wheel Size

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » Hilux Calip Conversion and Wheel Size Show: Today's Posts :: Show Polls Email to friend

Author

Topic

7M-Brisbane
Forums Junkie

Location:
Brisbane
Registered:
November 2002

Re: Hilux Calip Conversion and Wheel Size	Sun, 11 April 2004 02:59

I know someone () who has just fitted Landcruiser calipers (essentially the same) to an MX13 Corona. A number of different 14" wheels were tried without success. Finally a set of RT104 Corona rims were used, and they fit with no clearance problems. Unfortunately the stock MX13 hubcaps don't quite sit properly on the rims so the RT104 wheel trims will be used instead. You may have more luck with 14" alloy rims than 14" steel rims due to the internal design, although the main thing to watch out for is that on some wheels the mounting face of the wheel is larger than the hub and fouls on the caliper. 15's are your safest bet clearance-wise, but still be careful with the mounting face. [Report message to a moderator]

Current Time: Wed Jul 23 17:21:41 UTC 2025

Total time taken to generate the page: 0.0037240982055664 seconds

.:: Contact :: Home ::.