| Author | Topic |
|---|
Location:
Sydney
Registered:
May 2002
|
|
Re: quads on a 4age
|
Tue, 13 April 2004 06:11
 
|
 |
Well firstly you need an Aftermarket computer, which will cost anything upwards of $2500 realistically for a computer, install and tune, can be done cheaper though,
Then for the Quads, you can either get some dead webbers or similar, fit a TPS sensor Buy a redline manifold (I think $250),
Ask IRALLY as he is using this setup, but not the easiest to get working.
Or the 20V option, buy 20V throttle Bodies (lets say $500 if you can find some) again buy a redline Manifold get a machine shop to make up a thin plate that mounts the 20V throttles to the redline manifold, or again get a FWD manifold cheap, get a machine shop to cut the Plenum off and weld an alloy plate to the runners and mount the throttle bodies to that.(the way im running).
Another think to look out for if you run 20V throttles, a RWD top water inlet will foul on the TPS, so you will have to get either a custom one made up, or use a FWD water setup.
Ben.
AE86 Trueno 4AGE.
|
|
|
