Toymods Car Club Inc: Tech & Conversions => Accelerator cable in a TA22?

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » Accelerator cable in a TA22? Show: Today's Posts :: Show Polls Email to friend

Author

Topic

celicaboy
Forums Junkie

Location:
brisbane
Registered:
March 2003

Re: Accelerator cable in a TA22?	Tue, 13 April 2004 11:58

i just used one of the links from the linkage setup that adapted onto my std ra40 pedal i soldered it onto the end of the cable.. works well wondering how i soldered it? i bent the end of the cable and fed it through the link till it stuck out the side of the hole on the side of the link then wrapped it a lil bit ont eh outside then soldered it there then filled the hole where the cable enters into the link with solder.. it is very stong and have never snapped and i am hard on the pedal [Report message to a moderator]

Current Time: Wed Jul 23 22:59:32 UTC 2025

Total time taken to generate the page: 0.0051431655883789 seconds

.:: Contact :: Home ::.