| Author | Topic |
|---|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: Injector wiring problem
|
Wed, 14 April 2004 22:02
 
|
 |
batched injection, would have thought that 1 and 3 and 2 and 4 would have fired at the same time - normally they all share a common positive its just the ECU which grounds out the circuit to cause it to open...
so if its 2, check, that when car is running, that its got power to one of the terminals on the plug...if not, grab power from over at number 4 then try.
if its got power, then its not being grounded out by the ECU, so, drag the ground from 4 and you should be set.
(i'm thinking 4AGE here)
|
|
|
