Toymods Car Club Inc: Tech & Conversions => ae86 clutch kit ?

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » ae86 clutch kit ? Show: Today's Posts :: Show Polls Email to friend

Author

Topic

jazae86
Regular

I supported Toymods

Location:
Adelaide
Registered:
May 2002

Re: ae86 clutch kit ?	Fri, 30 August 2002 14:52

The 4AC clutch plate will not reach the outer edges of the flywheel face which is OK but if you destroy your plate then you may say good by to flywheel. Also bolting of pressure plate may be different. RWD 4AG + 4AC clutch will go and hold at high rev's, but won't hold burnouts. This is a short term fix. Cheap options: Find RWD Flywheel and use 4AC clutch kit (hell, you may have re-con clutch kit in there like I found on mine.)Tis is a very short term fix so pulling the box would be not long away and you don't want to do that. OR Try to find a used 100Kw clutch kit. OR if you can only find factory 100Kw kit's (say at wrecker's) that have worn out clutch plate, and pressure plate fingers look okay: take the pressure plate, go off to big part's store and grab a PBR organic (~$100) clutch disk for SX corolla. This would easily hold the 20v. Jaz [Report message to a moderator]

Current Time: Wed Jan 29 20:12:35 UTC 2025

Total time taken to generate the page: 0.0050511360168457 seconds

.:: Contact :: Home ::.