| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: RX7 Injectors
|
Fri, 23 April 2004 08:05
 
|
 |
if the injectors are about 2.4ohms, you could run resistors in line with them to reduce the current flw thru each, and thus have them act like high impedance ones..
for 1.5 amp, you'd want something like 25W, 7.5ohm
for 1 amp, maybe 25W, 10 ohm.
the "ohmite" heat sink resistors available around the place look the goods about $25-30 for a set of four. you'd need one per injector.
or you could just nick a resistor pack from a wrecker 
Cya, Stewart
|
|
|
