| Author | Topic |
|---|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: Electronic guru's : Modifying ACIS
|
Mon, 26 April 2004 01:25
 
|
 |
It would be quite possible to make a separate controller to operate the valve separately, thing is, why? Manufacturers have a knack of making those things change at a pretty good time anyway. Leave it disconnected, then connected, take a dyno pull of each, and see where it crosses. 
|
|
|
| | Subject | Poster | Date |
|---|
 |
Electronic guru's : Modifying ACIS
|
BlackSupra | Sun, 25 April 2004 12:26 |
|
Re: Electronic guru's : Modifying ACIS
|
thechuckster | Sun, 25 April 2004 12:58 |
|
Re: Electronic guru's : Modifying ACIS
|
mrshin | Mon, 26 April 2004 01:25 |
|
Re: Electronic guru's : Modifying ACIS
|
BlackSupra | Mon, 26 April 2004 07:30 |
|
Re: Electronic guru's : Modifying ACIS
|
gianttomato | Mon, 26 April 2004 08:16 |
|
Re: Electronic guru's : Modifying ACIS
|
justcallmefrank | Mon, 26 April 2004 09:39 |
|
Re: Electronic guru's : Modifying ACIS
|
ed_ma61 | Mon, 26 April 2004 12:40 |
|
Re: Electronic guru's : Modifying ACIS
|
BlackSupra | Mon, 26 April 2004 08:40 |
|
Re: Electronic guru's : Modifying ACIS
|
ed_ma61 | Mon, 26 April 2004 12:38 |
|
Re: Electronic guru's : Modifying ACIS
|
mrshin | Mon, 26 April 2004 12:34 |
|
Re: Electronic guru's : Modifying ACIS
|
BlackSupra | Mon, 26 April 2004 12:36 |
|
Re: Electronic guru's : Modifying ACIS
|
mrshin | Mon, 26 April 2004 12:38 |
|
Re: Electronic guru's : Modifying ACIS
|
BlackSupra | Mon, 26 April 2004 12:43 |
|
Re: Electronic guru's : Modifying ACIS
|
ed_ma61 | Mon, 26 April 2004 12:45 |
|
Re: Electronic guru's : Modifying ACIS
|
BlackSupra | Mon, 26 April 2004 12:52 |
