F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » compression depression Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Jonny2TG Forums Junkie Location: Tasmania Registered: May 2002	Re: compression depression Mon, 02 September 2002 11:31 3T, 3T-C, 13T, 3T-EU, they are all pretty much the same. The C does not mean Californian emissions, but does refer to basic emission equipment. I think you still need the exhaust side cut in the pistons. Even if you have lower lift, a regrind cam with longer duration will keep the valve open for longer when the piston is at the top. 2TG and 3T rods look the same I think, same dimentions. Either can be used but its rumoured that 2T-G ones are stronger. Don't get hung up about wether its the "Yamaha" or not. No the 88220 does not say "Yamaha" on it, so what. The 88220 head has smaller valves, also has less webbing in the head, and the exhaust studs are smaller. You can change the exhaust studs to bigger ones yourself. If you realy wanted to, you could get the valves and seats changed as well, only if you have the money. I think the 2TG stem seals are different to the 2T ones, maybe I forget. [Updated on: Mon, 02 September 2002 11:34] [Report message to a moderator]

	Subject	Poster	Date
	compression depression	BigBadBenny	Thu, 29 August 2002 09:08
	Re: compression depression	Karl_skewes	Thu, 29 August 2002 11:01
	Re: compression depression	BigBadBenny	Sat, 31 August 2002 03:02
	Re: compression depression	Jonny2TG	Sat, 31 August 2002 15:33
	Re: compression depression	BigBadBenny	Mon, 02 September 2002 09:09
	Re: compression depression	BigBadBenny	Tue, 03 September 2002 10:24
	Re: compression depression	Karl_skewes	Tue, 03 September 2002 10:32
	Re: compression depression	Jonny2TG	Mon, 02 September 2002 11:31
	Re: compression depression	Jonny2TG	Tue, 03 September 2002 11:12
	Re: compression depression	BigBadBenny	Wed, 04 September 2002 08:58
	Re: compression depression	Jonny2TG	Wed, 04 September 2002 15:28
	Re: compression depression	BigBadBenny	Wed, 04 September 2002 21:06
	Re: compression depression	goonman86	Fri, 15 April 2005 12:44
	Re: compression depression	Jonny2TG	Sun, 17 April 2005 00:53
	Re: compression depression	goonman86	Sun, 17 April 2005 02:12

Previous Topic:	TVIS warp on 4agte??? true or not??
Next Topic:	building 4age

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.