| Author | Topic |
|---|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: 4AGE into AE86.
|
Tue, 27 April 2004 22:53
 
|
 |
| Quote: |
to transfer the engine and gearbox as one unit, i think you will have to cut out the radiator support bracket, then weld it back on when you are finished.
|
YA MONG!!! there is 100% no need to cut out the top radiator support bracket, the engine will lift out over it with a little forthought and some common sense.... trust me, done this about 4 times now.
| Quote: |
the gearbox bellhousing will be different, as the clutch slave cylinder will be on the opposite side, you will want to use the jap gearbox in case of any incompatibility (should be able to use the oz one, but better safe than sorry)
|
Make sure you take from the jap AE86 the hydraulic lines from the clutch master to the clutch slave cylinder.
| Quote: |
as rex said, it is quite simple, but i imagine it will take a lot of time, ifd think of it as swapping bodies rather than swapping engines.
|
yes, its a piece of piss, and it wont really take that long.
|
|
|
