Toymods Car Club Inc: Tech & Conversions => 4AGE wiring help

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » 4AGE wiring help Show: Today's Posts :: Show Polls Email to friend

Author

Topic

RobertoX
Regular

Location:
Adelaide
Registered:
May 2002

Re: 4AGE wiring help

Wed, 28 April 2004 06:50

IRA11Y wrote on Wed, 28 April 2004 16:32

a speed signal is not neccesary in the rwd format, that loom looks anything but a standard item Rob, all those plugs are different colours when they should all be the bright yellow, and they should all fit up to the ecu without an issue so if one doesent fit, its not the right loom. Im guessing that someones used a plug off something elses to wire that up.

The guy I bought it off told me that it came out of a corolla GT, All the bits on the loom seem to fit really well into the car. I've been told that the plug that doesnt fit on the pic actually goes to the body (part of it looks like it controlls the window wiper motor) And then there is a plug from the body that goes to the computer...(which I'm gessing I'll have to make myself Confused

)

IRA11Y wrote on Wed, 28 April 2004 16:32

output lines from the 48 Jr ignitor are as follows ..

two linked brown (one from the plug)goto the + side of the coil
black goes to the - side of the coil, all the others should goto the green 4 pin plug that links back to the harness

Thanks

IRA11Y wrote on Wed, 28 April 2004 16:32

FROM the questions at your pictures.....

Quote:

the green one on the RHS for the 02 sensor?

that looks like the 4 pin plug for the ignitor/coil

So the 4 loose plugs on the igniter go to this?

IRA11Y wrote on Wed, 28 April 2004 16:32

Quote:

Yellow one on bottom right for solenoid resistor?

nah if thats a single pin its for the O2 sensor, if by solenoid you mean for the TVIS then that should be a blue plug the same squarish shape as the injector plugs

Quote:

plug wont fit, is it supposed to?

all three of those plugs should be the same colour as the middle one?? that loom looks very .... unique Smile

the smallest plug goes to the fuel relay .

That really sucks if the loom is indeed "unique"... It still has the rubber seal around the loom that goes on the firewall though, I really did think it is an original loom Confused

[Updated on: Wed, 28 April 2004 06:51]

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Sun Oct 27 22:30:14 UTC 2024

Total time taken to generate the page: 0.0060508251190186 seconds

.:: Contact :: Home ::.