Location: Auckland, New Zealand
Registered: January 2003
Re: URGENT: info/dimensions of 1jz flywheel/flexplate!
Fri, 30 April 2004 10:07
Primus rule!
I'm using a W box with a custom adaptor plate I've got, so the measurements are all out of whack. I posted the above thread because I was gonna get one made up.
BUT!... If you give me the measurements off your one it may turn out that it'll work. I'll need to drill some holes to match my pressure plate but if the thickness is about right then I will endeavour to buy yours!
SO!... If you could hit me with these I would be mighty thankful:
- longitudinal distance from where crank meets fly to bearing surface for clutch
- overall diameter of bearing surface
- and as many pics of it as possible
Fri, 30 April 2004 10:07
I posted the above thread because I was gonna get one made up.
