| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Rubber mount on 2 peice tailshaft
|
Fri, 30 April 2004 15:25
|
 |
|
Hold on here u can get a new centre bearing for your car, i have one on my 2 peice tailshaft. When i converted the arse end to borg warner i had the back peice shortened and a new universal joint suited to the borg warner welded on. New universals in the front section near the box, and the mid shaft was replaced with a toyota dyna unit. This is as strong as you would be able to make the 2 peice shaft with balancing and a new bearing it cost just under $600. However the place who modded my drive shaft sourced the centre bearing, so try the place who shortend your rear section and see wat they come up with. I found i had to stick with the 2 peice becuase of the way my exhaust x over under the rear section of the shaft, so although it might have been pricy i doubt all the other work i done would have been a total of under 200 so i would say the centre bearings are more like 150-200 for a 23 new.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Rubber mount on 2 peice tailshaft
|
Siktoy ra23 | Mon, 26 April 2004 10:11 |
|
Re: Rubber mount on 2 peice tailshaft
|
justcallmefrank | Mon, 26 April 2004 10:12 |
|
Re: Rubber mount on 2 peice tailshaft
|
Siktoy ra23 | Mon, 26 April 2004 10:26 |
|
Re: Rubber mount on 2 peice tailshaft
|
justcallmefrank | Mon, 26 April 2004 10:28 |
|
Re: Rubber mount on 2 peice tailshaft
|
Siktoy ra23 | Mon, 26 April 2004 10:36 |
|
Re: Rubber mount on 2 peice tailshaft
|
thechuckster | Mon, 26 April 2004 11:02 |
|
Re: Rubber mount on 2 peice tailshaft
|
Siktoy ra23 | Mon, 26 April 2004 11:55 |
|
Re: Rubber mount on 2 peice tailshaft
|
mrshin | Mon, 26 April 2004 12:30 |
|
Re: Rubber mount on 2 peice tailshaft
|
Siktoy ra23 | Mon, 26 April 2004 12:44 |
|
Re: Rubber mount on 2 peice tailshaft
|
Grega | Mon, 26 April 2004 20:12 |
|
Re: Rubber mount on 2 peice tailshaft
|
QIK 3SGTE | Mon, 26 April 2004 22:17 |
|
Re: Rubber mount on 2 peice tailshaft
|
celicaboy | Tue, 27 April 2004 10:32 |
|
Re: Rubber mount on 2 peice tailshaft
|
justcallmefrank | Wed, 28 April 2004 00:29 |
|
Re: Rubber mount on 2 peice tailshaft
|
CrAiGzEE | Wed, 28 April 2004 00:30 |
|
Re: Rubber mount on 2 peice tailshaft
|
Siktoy ra23 | Wed, 28 April 2004 12:20 |
|
Re: Rubber mount on 2 peice tailshaft
|
Siktoy ra23 | Fri, 30 April 2004 07:59 |
|
Re: Rubber mount on 2 peice tailshaft
|
7M-Brisbane | Fri, 30 April 2004 08:25 |
|
Re: Rubber mount on 2 peice tailshaft
|
Siktoy ra23 | Fri, 30 April 2004 10:06 |
|
Re: Rubber mount on 2 peice tailshaft
|
QIK 3SGTE | Fri, 30 April 2004 12:41 |
|
Re: Rubber mount on 2 peice tailshaft
|
Jayem | Fri, 30 April 2004 13:26 |
|
Re: Rubber mount on 2 peice tailshaft
|
Fattony | Fri, 30 April 2004 15:25 |
