| Author | Topic |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: How to hi-flow a fuel injector
|
Thu, 23 May 2002 13:48
 
|
 |
yep, upping the fuel pressure is easy, and will be doing that with a RRFPR.
however, i also want to run larger injectors, and the size im after is hard to find (210's)
the idea is to run the stock 5m ecu, and basically fool it into running 10psi, whilst remaining stoichiometric f/r across the pressure curve. to do this will require (most likely) an adjustable base pres rrfpr, and slghtly larger injectors running at slightly lower base pressure at idle.
a tricky balancing act, yes, but it can be done.
so, back to the point, does anyone know if and how you can increase an injector's flow (from 182-210cc) for a given standard fuel presure? its been suggest to me that it can be done, but... you people have an opinion??
cheers
ed
[Updated on: Thu, 23 May 2002 13:49]
|
|
|
