| Author | Topic |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
Re: Help with offset question
|
Mon, 03 May 2004 00:16
 
|
 |
Sorry to dig up an old thread here but this weekend I took some measurements to try and determine the exact offset of my current wheels.
With the new diff combo they do not fit anymore and rub the lips of the guards on the rear.
So they are 7" wheels, and from the rear of the wheel to the mounting face it is 120mm.
So the wheels is 175mm wide (7" x 25).
Middle would be 87.5mm. So from the middle of the wheel to the mounting face is 120mm - 87.5mm = 32.5mm
So is that correct, +32.5mm offset?
If that is correct, kinda sux as to move the wheel in even more will be like +50mm offset.
Can someone confirm my calculations? Is it odd for a RWD RA28 to have +32mm mags? I thought that was more a newer car/fwd offset?
Thanks
Joel
|
|
|
| | Subject | Poster | Date |
|---|
 |
Help with offset question
|
TurboRA28 | Fri, 12 March 2004 01:04 |
|
Re: Help with offset question
|
Norbie | Fri, 12 March 2004 01:16 |
|
Re: Help with offset question
|
bbaacchhyy | Fri, 12 March 2004 02:17 |
|
Re: Help with offset question
|
ra23celica | Fri, 12 March 2004 06:30 |
|
Re: Help with offset question
|
TurboRA28 | Mon, 03 May 2004 00:16 |
|
Re: Help with offset question
|
ra23celica | Mon, 03 May 2004 00:46 |
|
Re: Help with offset question
|
TurboRA28 | Mon, 03 May 2004 02:08 |
|
Re: Help with offset question
|
ra23celica | Mon, 03 May 2004 02:17 |
|
Re: Help with offset question
|
ae86drift | Mon, 03 May 2004 02:30 |
|
Re: Help with offset question
|
TurboRA28 | Mon, 03 May 2004 02:31 |
|
Re: Help with offset question
|
ra23celica | Mon, 03 May 2004 06:32 |
|
Re: Help with offset question
|
TurboRA28 | Mon, 03 May 2004 06:42 |
|
Re: Help with offset question
|
ra23celica | Mon, 03 May 2004 06:51 |
|
Re: Help with offset question
|
TurboRA28 | Mon, 03 May 2004 06:54 |
|
Re: Help with offset question
|
ra23celica | Mon, 03 May 2004 07:03 |
