| Author | Topic |
|---|
I supported Toymods
Location:
NE Melbourne
Registered:
May 2002
|
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
Wed, 04 September 2002 00:01
 
|
 |
no... RA60 discs are too small.... with the hilux caliper bolted to the corona strut, it is required that a disc of 266mm be used as this is the diameter of the pads in position within the caliper...
the pug discs are 273mm, so i reccomend that they are turned down to 266mm to avoid ugly and unnecessary overhang of the pads. this is what i have done! also you say that the RA60 discs are 22mm thick... i think this is too thick as the LN106 calipers will only accept upto 20mm thick without machining them out...
|
|
|
| | Subject | Poster | Date |
|---|
 |
ra28/xt130 camber adjuster/ shocks/springs
|
TurboRA28 | Wed, 28 August 2002 00:54 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
mrshin | Wed, 28 August 2002 04:59 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
Karl_skewes | Thu, 29 August 2002 11:03 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
dorikin | Thu, 29 August 2002 15:52 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
Karl_skewes | Thu, 29 August 2002 22:54 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
TurboRA28 | Thu, 29 August 2002 23:14 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
Karl_skewes | Fri, 30 August 2002 12:13 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
dorikin | Tue, 03 September 2002 08:46 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
Karl_skewes | Tue, 03 September 2002 10:30 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
Jonny2TG | Tue, 03 September 2002 13:39 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
Karl_skewes | Tue, 03 September 2002 20:56 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
dorikin | Wed, 04 September 2002 00:01 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
Jonny2TG | Wed, 04 September 2002 00:33 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
dorikin | Wed, 04 September 2002 06:51 |
|
Re: ra28/xt130 camber adjuster/ shocks/springs
|
mckejon | Tue, 15 April 2003 01:01 |
