Location: Turramurra, Sydney.
Registered: May 2002
Re: 4AGTE Questions
Tue, 04 May 2004 01:58
I've just measured up all my water & oil lines for my 4AGTE, & I'm just about to head out to get the fittings I need.
I'm T'ing off an oil line from the oil pressure sensor to feed oil to the turbo, then I'm using that bolt loking think next to the oil pressure sender which is actually a drain cock to drain coolant, I'm using this to supply coolant to the turbo. Then I'm returning the coolant to the temp sensor housing on the back of the head, as I'm not using one of the 2 temp sensors on this (it's either for the cold start injector or thermo fan, one of the 2).
I guess I'll know this afternoon if I can get all the fittings I need to hook it up like this.
EDIT: the most common way to feed coolant to a turbo is to T off the 2 heater hoses, one supply & one return, but I'm just looking for something a bit neater.
Tue, 04 May 2004 01:58
